We use cookies to make your experience better. Read more
ABS GF Glass Fibre Filament
As low as €30.99
inc. VAT
In stock
Only %1 left
SKU
000028517046
🔧 3DTrcek ABS GF Glass Fibre Filament
Engineered in Slovenia. Trusted across Europe.
Need tougher prints? Our ABS GF delivers engineering-grade strength, 📏 dimensional stability, and reduced warping — reinforced with glass fibres for parts that won’t crack under pressure.
✅ Pro-Level Strength • ✨ Smooth Matte Finish • 🔥 Heat & Impact Resistant
Join 20,000+ users printing with 3DTrcek filaments today!
ABS-GF (GLASS FIBER) FILAMENT
Reinforced with glass fiber for higher strength & stiffness, reduced warping, and ~95 °C heat resistance. 3DTrcek ABS-GF prints dimensionally accurate, matte-finish functional parts on your favorite machines. Engineered in Slovenia.
✅ Engineering-Grade Strength
📏 Dimensional Stability
🔥 Heat & Wear Resistant
🔧 AMS-Ready, Easy to Run
✅ Stronger Prints
Glass fiber reinforcement boosts strength & stiffness for tools, gears, brackets, and mounts.
📏 Low Warp, High Accuracy
Reduced shrinkage and better layer bonding keep large, flat parts down and in tolerance.
🔥 Heat-Ready (~95 °C)
Handles elevated temps for automotive clips, shop fixtures, and hard-working enclosures.
✨ Matte, Pro Finish
Clean surface that hides layer lines for parts that look as good as they perform.
🧹 High Interlayer Bond
Tough Z-axis performance for parts that resist cracking under real-world loads.
🔧 AMS-Friendly Setup
Runs in AMS/MMU systems without breaking.
When to choose Glass Fiber Reinforced ABS over regular ABS?
Compared to regular ABS, glass fiber reinforcement makes prints stronger, stiffer, and more stable.
Regular ABS
- 🔹 Can warp on large prints
- 🔹 Higher shrinkage — adjustments needed for dimensional accuracy
- 🔹 Lower compressive strength than ABS-GF
- 🔹 More ductile: better at bending and absorbing impact without cracking
ABS Glass Fiber
- 🔹 Strength gain (20–50% boost depending on geometry)
- 🔹 Increased stiffness and rigidity under load
- 🔹 Significantly reduced warping and shrinkage
- 🔹 Better dimensional accuracy — large flat prints stay flat
- 🔹 More brittle, may snap instead of flexing under sudden, high-force impacts
Note: Performance improvements depend on part design and print settings. Typical results include up to 20–50% strength/stiffness boost and heat tolerance around 95 °C.
Built for Demanding Applications
Print parts that work in the real world—strong, stable, and heat-ready.
🚗
Automotive & Industrial
- Under-hood components
- Jigs and fixtures
- Functional prototypes
🚀
RC & Hobbies
- Drone frames that survive crashes
- Lightweight yet strong components
- Sporting goods parts
💼
Professional
- End-use mechanical parts
- Enclosures and housings
- Gears and mechanisms
Understanding Your 3DTrcek ABS-GF (Glass Fiber) Filament
Key characteristics of glass-fiber reinforced ABS — engineered for strength, stiffness, heat tolerance, and dimensional stability.
Core Properties
- Mechanical: High strength & stiffness, strong interlayer bond, reduced warping for large/flat parts.
- Thermal: Typical heat tolerance ~95 °C (part & settings dependent).
- Surface: Matte finish that hides layer lines; clean, professional look.
Post-Processing
- Finishing: Sands and machines cleanly; wet-sanding yields smooth matte. Vapor smoothing is limited due to fibers—use filler/primer for gloss.
- Machining: Drill, tap, countersink; use sharp tools and moderate feeds. Wear mask when sanding (fine dust).
- Bonding & Paint: Bonds with ABS cement/acetone weld; accepts primer and paint for cosmetic parts.
Optimal Storage
- Location: Store in a dry, dark space; avoid UV exposure.
- Packaging: Keep vacuum-sealed with desiccant; reseal between sessions.
- Temp: Store between 0 °C and 40 °C; avoid heat sources.
- Drying: 55 °C for 4–6 h if exposed to humidity; allow to cool sealed before use.
Engineered Without Compromise
3DTrcek filaments are manufactured to the highest engineering standards — for makers, designers, and those who demand perfection.
- ✅ Industrially precision-wound for zero tangles
- ✅ Engineered with strict ±0.05mm diameter tolerance
- ✅ No recycled materials, 100% virgin-grade polymers
- ✅ Inspected & sealed within 5 minutes of extrusion
- ✅ Trusted by engineers, educators, and designers across Europe
Real footage from our industrial filament winding process
Works Flawlessly with Your Printer. Guaranteed.
Optimized for Bambu, Prusa, Creality, Anycubic, and more — just load and print.
Bambu
Prusa
Creality
Anycubic
Elegoo
Get our Technical Datasheets and Bambu/Orca Slicer Printing Profiles
Get instant access to our technical datasheets and optimized slicer profiles
Material Technical Datasheets
Detailed specifications, mechanical properties, and handling guidelines
Bambu/Orca Slicer Profiles
Pre-configured profiles for perfect prints with your favorite slicer
Advanced Printing Guides
Expert techniques for achieving professional results
Exclusive Updates
Be the first to know about new materials and profiles
Why 3DTrcek? Quality You Can Trust.
Experience the difference of meticulously engineered filaments, backed by decades of expertise and global trust.
55+ Years Expertise
Leveraging over half a century in plastic processing for unmatched filament quality.
Trusted Worldwide
Relied upon by 20,000+ customers and 5,000+ companies globally.
500,000+ Rolls Produced
Our extensive production scale ensures consistent, top-quality standards for every project.
Why Choose 3DTrcek Filament?
Experience the difference of precision engineering. Stop wasting time and filament on frustrating print failures.
Key Advantage
Generic Filament
3DTrcek Filament
Print Reliability
❌
Frequent clogs & jams
Frequent clogs & jams
✅
Smooth, consistent flow
Smooth, consistent flow
Dimensional Accuracy
❌
Fluctuates widely
Fluctuates widely
✅
Strict ±0.05mm
Strict ±0.05mm
Successful Prints
❌
High failure rate
High failure rate
✅
Success with every spool
Success with every spool
Print Strength & Durability
❌
Brittle, weak bonds
Brittle, weak bonds
✅
Strong, durable prints
Strong, durable prints
Tangle-Free Guarantee
❌
Knots ruin prints
Knots ruin prints
✅
Precision wound, no tangles
Precision wound, no tangles
Color Consistency
❌
Dull, inconsistent
Dull, inconsistent
✅
Vibrant, batch-consistent
Vibrant, batch-consistent
Warping Control
❌
Prints lift off bed
Prints lift off bed
✅
Stable prints, easy adhesion
Stable prints, easy adhesion
Manufacturing Origin
❌
Often unverified (China)
Often unverified (China)
✅
Proudly Made in EU (Slovenia)
Proudly Made in EU (Slovenia)
Expert Support
❌
Minimal or none
Minimal or none
✅
Real engineers ready to help
Real engineers ready to help
Quality Guarantee
❌
Buy at your own risk
Buy at your own risk
✅
Print satisfaction guaranteed
Print satisfaction guaranteed
Hear From Our Satisfied Makers
Don't just take our word for it – see why thousands of 3D printing enthusiasts trust 3DTrcek for their best prints.
★★★★★
"Finally, a filament that just works! My Bambu Lab P1S has never been happier. No tangles, no fuss – just perfect prints every time. Highly recommend!"
– David, Hobbyist Maker
★★★★★
"I switched to 3DTrcek because of price, but I stayed for the quality. The precision is unmatched, and I've never had a failed print due to filament. It's truly engineering-grade material, made right here in Europe."
– Martin, Product Designer
★★★★★
"As a small business owner, every wasted print costs me. 3DTrcek filaments have drastically cut down my material waste and improved print reliability, which directly impacts my bottom line."
– Robert, Small Business Owner
Your Journey to Flawless 3D Printing
Discover how 3DTrcek Filament elevates your entire printing experience, from your very first spool.
🌟 First Week
From day one, experience pure ease and reliability that transforms your initial prints:
- ✅ Flawless first prints: Zero clogs, tangles, or frustrating failures.
- ✅ Plug-and-print: No tuning or calibration headaches.
- ✅ Skyrocketing confidence: Spend more time printing, less time troubleshooting.
🧪 First Month
As your skills grow, 3DTrcek Filament empowers you to push boundaries with new capabilities:
- ✅ Reliable long prints: Confidently tackle multi-hour and overnight projects.
- ✅ Higher speeds, better quality: Optimized for faster printing without sacrificing detail.
- ✅ Explore advanced materials: Seamlessly transition to ABS, ASA, TPU, and more.
🏆 Third Month
By now, 3DTrcek Filament has become your indispensable partner for professional-grade results:
- ✅ Addicted to the results: 3DTrcek is the standard and you can't go back to generic brands.
- ✅ No more second guessing: You trust your filament to work — now all your focus goes into creativity.
- ✅ Your workshop runs on 3DTrcek: You’ve built a workflow around precision, speed, and reliability.
Lab-Tested for Real-World Stress
In-house testing validates strength, adhesion, and dimensional consistency.
Mechanical Properties
Tensile and flexural tests support dependable everyday strength.
Thermal Stability
Consistent melting behavior across batches for predictable results.
Flow Consistency
Melt flow checks prevent under-extrusion and clogging issues.
Dimensional Precision
Laser micrometers monitor diameter for stable extrusion and clean layers.
Roundness & Ovality
Cross-section control for smooth feeding and accurate prints.
Detailed Surface Inspection
Every spool inspected for a clean, sharp, professional finish.
ABS-GF (Glass Fiber) Printing Recommendations
Optimal settings for reliable, warp-free results with 3DTrcek ABS-GF Filament (black & white)
Temperature Settings
Printing Temperature
290 ℃
Range: 250 ℃ – 300 ℃
Bed Temperature
95 ℃
Range: 80 ℃ – 110 ℃
Chamber / Enclosure
60–70 ℃ (recommended)
Use an enclosure for best layer bond & flatness
Drying Settings
50 ℃ / 4–6 h
If filament becomes damp
Part Cooling
0–20 %
Keep low for strength & warp control
Important Notes
ABS-GF is engineered for dimensional stability and reduced warping. An enclosure is recommended for large or flat parts. Use a 5–10 mm brim and a light glue-stick/adhesive on PEI for extra hold. Compatible with AMS. Ensure good ventilation as with any ABS-based material.
Speed & Flow Settings
Printing Speed
80–200 mm/s
Maximum (machine-dependent): ~300 mm/s
Volumetric Flow
25 mm³/s
Tune per nozzle & hotend
Flow Ratio
0.91
@ ~100 mm/s
Retraction
N/A
Need Technical Assistance?
These values are proven starting points for ABS-GF. Printers vary — feel free to tune outside these ranges for your specific setup, part geometry, and desired strength/finish.
+386 (0)1 242 83 60
Frequently Asked Questions
Everything you need to know about Glass Fiber Reinforced ABS (ABS-GF)
How heat-resistant is it?
Typical heat tolerance is about ~90–110 °C depending on part geometry and print settings. For under-hood clips, fixtures, and warm environments, it holds shape better than regular ABS.
Does it warp like regular ABS?
Significantly less. Glass fiber acts like rebar, reducing shrinkage and improving dimensional stability—especially on large, flat parts. An enclosure still helps for best results.
Do I need an enclosure or ventilation?
An enclosure is recommended for best layer adhesion and warp control. As with all ABS-based materials, provide ventilation or filtration when possible.
Is it AMS/MMU friendly?
Yes—stable diameter and tidy winding make it suitable for Bambu AMS and other multi-spool systems. Use the provided profiles for smooth swapping.
What surface finish can I expect?
A clean, matte finish that hides layer lines well. If you need a gloss look, use filler/primer and paint; solvent smoothing is limited due to the fiber content.
Do I need to dry or special-store it?
Store sealed with desiccant. If exposed to humidity, dry at ~55 °C for 4–6 hours. Proper storage improves surface quality and consistency.
Any safety tips for sanding or machining?
Wear a dust mask and eye protection when sanding, drilling, or machining. Wet-sanding reduces airborne dust; vacuum or wipe down work surfaces after finishing.
Related Products
- As low as €11.89inc. VATRegular Price €16.99inc. VAT
- As low as €11.89inc. VATRegular Price €16.99inc. VAT
- As low as €17.43inc. VATRegular Price €24.90inc. VAT
- As low as €19.59inc. VATRegular Price €27.99inc. VAT
- As low as €9.79inc. VATRegular Price €13.99inc. VAT
- As low as €10.49inc. VATRegular Price €14.99inc. VAT
Upsell Products
- As low as €11.89inc. VATRegular Price €16.99inc. VAT
- As low as €16.09inc. VATRegular Price €22.99inc. VAT
- €9.99inc. VAT
Close
- -30%
ABS GF Glass Fibre Filament
Please complete your information below to login.
Sign In
Create New Account